North Florida’s most trusted mobile sandblasting contractor — delivering expert dustless blasting, precision surface preparation, and professional paint for residential, commercial, and industrial clients across Starke, Jacksonville, St. Augustine, Gainesville, and beyond.
See results before you pay
Less downtime for your project
Safe & Environmentally Aware
Safe for delicate surfaces
Starke Sandblasting is the surface preparation and sandblasting division of After Hours Welding & Sandblasting, proudly based in Starke, Florida (ZIP 32091). Armed with one of the largest, fully self-contained, towable blast rigs operating in North Florida, we consistently deliver faster project completion and lower pricing than competitors relying on smaller, slower equipment. From high-rise commercial structures and industrial facilities to residential homes, log cabins, and antique vehicle restoration — our craftsman-level expertise ensures every surface is treated with precision, honesty, and care.
Deliver the highest-quality sandblasting service across North Florida and Georgia through exceptional workmanship, total transparency, and an unwavering commitment to client satisfaction.
We believe in telling you the full truth about your project — including any potential side effects of blasting your specific surface type. We will never exaggerate results to win your business. What we quote is what you pay. What we promise is what gets delivered. Our reputation has been built on referrals and repeat customers, not marketing gimmicks.
Our loyal repeat client base across North Florida and Georgia speaks for itself. We show up when we say we will, complete projects on schedule, and leave your site cleaner than we found it — all blasting debris is cleaned up and hauled away by our team as part of every job.
We operate in full compliance with EPA clean air quality standards and all OSHA abrasive blasting safety regulations — using filtered air control equipment for blast technician protection and environmentally safe debris disposal. We do what is right, not just what is required.
From structural wood to industrial steel — we select the right abrasive media and technique for every surface to deliver superior, lasting results with zero guesswork.
Strip paint, stain, and varnish from wood ceilings, tongue-and-groove panels, exposed beams, log cabin siding, barn wood, and furniture. Our precision blasting technique exposes the natural wood grain without over-cutting the fiber — ideal for mezzanine, bow truss, A-frame, cathedral, scissor truss, and vaulted ceilings. Removes smoke and fire damage from wood. Restores original texture for re-staining or sealing.
Paint on concrete penetrates deep into the porous surface — standard sanding and scraping cannot reach it. Our sandblasting process reaches into those pores for 98%+ paint removal effectiveness on driveways, sidewalks, walls, floors, and parking structures. Eliminates dangerously slippery painted walkways, removes graffiti, and strips aging peeling coatings that cause new paint layers to fail prematurely.
Our environmentally responsible blasting option uses walnut shell media and garnet mineral abrasives — gentler on delicate surfaces while dramatically reducing the environmental footprint of traditional silica sand blasting. Ideal for indoor projects, historically significant structures, food-adjacent facilities, or any application where air quality and chemical safety are priority concerns. Available by request (additional media fees apply).
Rust removal, corrosion prevention, and precision surface profiling for antique vehicles, trailers, boats, agricultural equipment, industrial machinery, and structural steel. Properly profiled metal creates 5 to 10 times more surface area for paint adhesion — extending your coating's effective lifespan to 15–30 years versus 5–10 years on unblasted metal. All new bridges, water towers, and industrial steel are profile-blasted before final coating for this exact reason.
Restore the original beauty of painted or stained brick, natural stone, block, and masonry surfaces. Whether it is a residential fireplace, a commercial building facade, or a historic masonry wall, our process safely removes decades of built-up paint and surface coatings without damaging the underlying mortar or masonry substrate. Results in a clean, natural surface ready for sealing or left in its original exposed state.
After blasting, surfaces are perfectly profiled and primed for a long-lasting protective coat. We offer professional post-blast painting and protective coating application for metal, wood, concrete, and masonry — completing the full surface restoration cycle from surface preparation to final finish in a single, professionally managed engagement. No need to coordinate between separate contractors.
No mystery pricing, no surprises. Here is exactly what happens from your first call to completed project.
Call us and describe your project. We listen carefully, ask the right technical questions, and give you an upfront, honest assessment of what blasting can and cannot achieve on your specific surface — including any potential side effects. No obligation, no pressure.
We visit your site, evaluate the surface condition, select the ideal abrasive media for your substrate, and provide a complimentary test blast so you can evaluate the exact result before committing to the full project. No guesswork. No risk. You see the outcome first.
Receive a fully itemized, honest quote with no hidden fees. We recommend the most cost-efficient approach to achieve your desired result — always informing you of trade-offs between cost and outcome so you can make the best decision for your budget.
Our self-contained blast rig moves in and completes the project with speed and precision. Upon completion, our team cleans up and hauls away all blasting debris — leaving your property spotless and ready for the next phase of your restoration or construction project.
A larger rig, lower prices, and more honesty than any competing sandblasting contractor operating in North Florida and Southern Georgia.
Our full-mounted, self-contained towable blast rig is the largest and fastest unit operating in the region. Larger rig means faster abrasive throughput, faster job completion, less time on your property, and ultimately lower costs compared to contractors using smaller, slower, less efficient equipment.
We will tell you the complete truth about your project — including when blasting has potential side effects on your specific surface or coating type. We will never inflate expectations to win your business. Every quote is exactly what you pay. Our integrity is our reputation.
We operate in full alignment with OSHA abrasive blasting standards (29 CFR 1910.94) and EPA National Ambient Air Quality Standards — using certified breathing respirator systems, filtered air control equipment, and environmentally responsible debris disposal. We go beyond minimum compliance.
Before you commit a single dollar to the project, we provide a complimentary test blast on your actual surface so you can evaluate the real-world result firsthand. No guesswork. No risk. No obligation. You only proceed when you are fully confident in the outcome.
We show up when we say we will — every time. Our repeat client base spanning years across North Florida and Georgia reflects our consistent track record of on-time arrival, quality execution, and on-schedule project completion.
We do not just blast and leave. All blasting media and surface debris is collected, cleaned, and hauled away by our crew as part of every standard job — leaving your site clean, safe, and ready for the next step in your project.
Wood, concrete, metal, stucco, brick, stone — we handle every surface type using the optimal abrasive media matched precisely to your project. Available media includes garnet, walnut shell, coal slag, glass beads, steel grit, steel shot, sodium bicarbonate, and more. See SSPC surface preparation standards for the industry benchmarks we align with.
Our business grows through referrals and repeat customers — not advertising. Clients return because we deliver honest, measurable results at genuinely competitive pricing, backed by decades of hands-on surface preparation expertise in residential, commercial, and industrial environments.
Starke Sandblasting delivers professional surface preparation services across every major industry sector requiring precision blasting and restoration throughout North Florida and Southern Georgia.
Factories, warehouses, industrial equipment frames, and structural steel surface preparation for protective coatings.
Home exteriors, interior exposed ceiling beams, wood ceilings, fireplaces, driveways, and patios.
Retail building facades, parking structures, commercial flooring, and exterior wall restoration.
Hull restoration, aluminum boat surfaces, yacht decks, and marine metal equipment.
Tractor trailers, fleet vehicles, transport containers, and commercial vehicle surfaces.
Barn structures, silo surfaces, farm outbuildings, and agricultural machinery.
Antique and classic vehicles, rust removal, full body surface prep for show-quality repaints.
Historic buildings, decorative masonry facades, exposed aggregate feature walls, and ornamental stonework.
Honest reviews from clients who experienced the Starke Sandblasting difference firsthand.
St. Augustine, FL
He blasted the paint off our log cabin exterior and the wood looked absolutely brand new — a stunning transformation. He was completely upfront about the entire process from day one and delivered exactly what he promised. We will call Starke Sandblasting again without any hesitation.
Orlando, FL
We had our commercial concrete driveway sandblasted after the painted surface became dangerously slippery in wet weather. The crew arrived on time, worked professionally, and the result was exactly what we needed. They cleaned everything up and left the site spotless. Highly recommended for any concrete surface project.
Jacksonville, FL
Used them for a large commercial steel staircase — full rust removal and surface prep before repainting. Their turnaround time was faster than every other contractor we had quoted, and their pricing was the most transparent and competitive in the region. Exceptional quality of work and professionalism throughout.
Straight answers to the questions we hear most from residential, commercial, and industrial clients. No fluff, no evasion.
We sandblast virtually every surface type — wood (ceilings, beams, siding, log cabins, furniture), concrete (driveways, sidewalks, walls, floors, parking structures), metal (vehicles, trailers, boats, industrial equipment, structural steel), brick, natural stone, masonry, and stucco. Each surface receives the correct abrasive media and pressure settings for optimal results.
Pricing varies based on surface type, total square footage, number of paint layers, accessibility, and the abrasive media required. As a general reference, a typical 1,200 sq ft residential home exterior takes 8–10 hours to complete. We always provide a complimentary on-site assessment and fully transparent quote with no hidden fees. Call (904) 977 0117 to discuss your specific project.
In experienced hands with the correct media selection and pressure calibration, sandblasting does not damage properly prepared surfaces. We always perform a complimentary free test blast on your actual surface first so you can evaluate the result before the full job begins. We also mask and protect all adjacent surfaces including windows, wood trim, and electrical fixtures.
Yes — we are a 100% mobile sandblasting operation. We mobilize to your location anywhere across North Florida, Central Florida, and Southern Georgia with our fully self-contained, towable blast rig. We do not operate a shop location for drop-off blasting service.
Dustless blasting (also called wet sandblasting) adds water to the abrasive blast stream, dramatically reducing airborne dust and particulate matter in the air. It is the preferred method for exterior brick, concrete, and stucco projects. Traditional dry sandblasting remains optimal for metal surface profiling and most interior applications. See OSHA abrasive blasting standards at OSHA for technical reference.
We operate in full compliance with EPA air quality standards and all OSHA regulations, using filtered air control systems and certified breathing respirators. All blasting debris is disposed of in an environmentally responsible manner. For projects requiring an even gentler environmental footprint, ask about our Green Blasting service using walnut shell and garnet abrasive media green-blasting for details.
Project duration depends on surface area, material type, coating thickness, and accessibility. Typical benchmarks: a 1,200 sq ft home exterior takes 8–10 hours; a standard passenger vehicle takes 4–6 hours; large industrial or commercial projects are individually scoped during the on-site assessment. Our oversized blast rig completes jobs significantly faster than competitors using smaller equipment — saving you both time and money.
Based in Starke, FL (Bradford County, ZIP 32091), we mobilize our full-size blast rig directly to your project site anywhere across North Florida, Central Florida, and Southern Georgia. Travel costs are based primarily on abrasive consumption — not mileage. Distance from our base does not significantly affect your project cost.
Bradford County & surrounding communities — fastest response time, no travel surcharge.
Duval County and surrounding areas including Nassau, Clay, and St. Johns Counties.
St. Johns County — coastal residential, commercial, and historic masonry projects.
Alachua County — University area residential, commercial, and industrial clients.
Central and East Coast Florida — larger commercial and industrial project coverage.
Southeast Georgia and coastal Glynn County coverage.
Get a on-site consultation, honest surface assessment, and a fully itemized professional quote — absolutely no obligation, no pressure. We serve clients across North Florida and Southern Georgia with the same commitment to quality and transparency on every project, large or small.
(904) 977 0117
Starke, Florida 32091 (Bradford County)
Monday – Saturday | 8:00am – 7:00pm
